AcuRite 00381 Instruction Manual Download Page 4

SETUP 

Display 

1. Slide off the battery compartment cover. 
2. Insert 2 x AAA batteries into the battery 

compartment, as shown. Follow the 

polarity (+/-) diagram in the battery 

compartment. 

3. Replace the battery cover. 

Select Degrees Fahrenheit or Celsius 

To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, 

press the “ºC/ºF” button located inside the battery compartment of the display. 

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE 

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. 

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be 

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used 

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fre, 

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge 

non-rechargeable batteries. DO NOT short-circuit the supply terminals. 

Placement for Maximum Accuracy 

AcuRite sensors are sensitive to surrounding environmental conditions. Proper 

placement of both the display and outdoor sensor are critical to the accuracy 

and performance of this product. 

Display Placement 

Place the display in a dry area free of dirt and dust. Display stands 

upright for tabletop use or is wall-mountable. 

Outdoor Sensor Placement 

Sensor must be placed outside to observe outdoor conditions. 

Sensor is water resistant and is designed for general outdoor use, 

however, to extend its life place the sensor in an area protected 

from direct weather elements. 
Hang the sensor using the integrated hang holes or hanger, or by 

using string (not included) to hang it from a suitable location, like a 

well covered tree branch. The best location is 4 to 8 feet above the 

ground with permanent shade and plenty of fresh air to circulate 

around the sensor.  

Summary of Contents for 00381









Reviews: