568
uu
Surround View Camera System
*
u
Displaying an Image From the Surround View Cameras
Driving
Displaying an Image From the Surround View
Cameras
■
For frontal views:
Press the
CAMERA
button when the vehicle is
stationary or moving at 12 mph (20 km/h) or
slower. Press the button again to switch
camera views.
■
For rear reviews:
Change the gear position to
(
R
when the
vehicle is stationary. Press the
CAMERA
button to switch to rear view mode.
You can customize the display setting.
2
P. 359
1
The surround view camera system does not eliminate
all blind spots. The system is for your convenience
only.
Always keep the camera lenses clean and free from
debris.
If the rear camera lens is covered with dirt or
moisture, activate the rearview camera washer or use
a soft, moist cloth to keep the lens clean and free of
debris.
2
P. 206
CAMERA
Button
1
Displaying an Image From the Surround View Cameras
The navigation system is disabled when the gear
position is in
(
R
.
Pressing the
(home) or
(back) button while
the surround view camera system screen is displayed
cancels the front view screen of the surround view
camera system.
If you press the
CAMERA
button while the vehicle
speed is more than 16 mph (25 km/h), the standby
screen appears.
When the vehicle speed is reduced below 12 mph (20
km/h), the screen switches to a surround view camera
system image.
* Not available on all models
23 ACURA RDX-31TJB6400.book 568 ページ 2022年8月4日 木曜日 午後1時51分
Summary of Contents for RDX 2023
Page 1: ...2023 RDX Owner s Manual ...