uu
When Driving
u
Shifting
458
Driving
■
Sequential Mode Operation
1
Each paddle shift operation makes a single or double
gear change.
To change gears continuously, release the paddle
shifter before pulling it again for the next gear.
If the sequential mode gear selection indicator blinks
when you try to shift up or down, this means your
vehicle speed is not in its allowable gear range or the
protection of transmission system is necessary.
Slightly accelerate to shift up and decelerate to shift
down while the indicator is blinking.
The transmission is in
(
S
and
Sport
mode, to
prioritize the engine performance enhancement, the
transmission may not allow for shifting up while the
engine speed is low.
Sequential Mode Gear
Selection Indicator
Paddle Shifter
(Shift down)
Downshifting
when pulling
the
(
-
paddle
shifter.
(Changes to a
lower gear.)
Upshifting
when pulling
the
(
+
paddle
shifter.
(Changes to a
higher gear.)
(
-
(
+
Paddle Shifter
(Shift up)
23 ACURA RDX-31TJB6400.book 458 ページ 2022年8月4日 木曜日 午後1時51分
Summary of Contents for RDX 2023
Page 1: ...2023 RDX Owner s Manual ...