3.5. If the system
does not
initialize within
10 minutes
, a second screen (shown below) appears. The system is still
initializing, but it will not automatically change to the map screen when the initialization is complete. Do not follow
the screen instructions right away. After
30 minutes
, try restarting the engine to see if the system completed the
initialization. If it did not, then follow the screen instructions.
NOTE
The initialization screen may appear after battery voltage to the audio-navigation unit has been disconnected for
more than
5 minutes
. If that happens, follow the screen instructions. If you are still unable to get GPS
initialization, do a search in the service information using keyword
GPS
.
3.6. You will then see the map screen, but do not enter a destination yet. For the system to calculate a route, it may
still try to acquire the GPS satellites and align the current location to a mapped road (map matching). This
happens when you start driving in an open area. The map screen will change from
Locating Satellites
to
Ready
to Navigate
.
NOTE
If the map screen does not appear, select
HOME
, then
Navigation
.
Page
5
of
7
