| 75
BLUETOOTH®
HANDSFREELINK®
74 |
AUDIO AND CONNECTIVITY
1. Press the REAR (power) button on the front control panel.
2. Select Front/Rear to switch Rear mode.
3. Select Source.
The rear source is displayed on the On
Demand Multi-Use Display
TM
.
4. Select the audio source on the On Demand
Multi-Use Display
TM
.
The rear source is heard from the front speakers.
5. Select a station, channel, track, or chapter in the same way as the front audio
system.
Front Control Panel Operation
Operate the Rear Entertainment System (RES) from the On Demand Multi-Use
Display
TM
.
*if equipped
BLUETOOTH
® HANDSFREELINK®
Learn how to operate the vehicle’s hands-free calling system.
Basic HFL Operation
Make and receive phone calls using the vehicle’s audio system, without handling
your phone.
Visit
www.handsfreelink.com/Acura
(U.S.) or phone (888) 528-7876
(U.S. and Canada) to check phone compatibility.
To reduce the potential for driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving. Voice commands are
always available.
HFL Displays and Controls
Use the controls to enter information and make selections.
Pick-Up button:
Answer an incoming call, or
display speed dial and call history in the MID.
Selector wheel:
Scroll through speed dial and
call history in the MID. Press to make a selection.
Adjust volume during a call.
Hang-Up/Back button:
End or decline a call, or
clear HFL information in the MID.
Talk button:
Press to give HFL voice commands.
PHONE button:
Go
to the phone menu.
BACK button:
Return to the
previous display.
Interface Dial
: Rotate and press to select an
item in the upper display. Move up, down,
left, and right.
SMARTPHONE
button
Access Apple
CarPlay and Android
Auto.
SETTINGS button:
Go to Phone Settings.
Dual Screen Mode
Select between the two screen modes, single or dual.
Single mode
The selected source is displayed in the center of the screen.
Dual mode
Two separate screens are displayed side by side. You can only select one output
source from the front audio system. The other source must come from “REAR
AUX Video” or “REAR AUX HDMI”.
DVD
Press the DUAL
button.
Select the side
Select a source
(e.g., “Left”).
(e.g., “REAR
DVD
AUX Video”).
REAR AUX Video
Press the SWAP
button.
DVD
REAR AUX Video
DVD
REAR AUX Video
Press the
SINGLE button.
Select a source
DVD
(e.g., “DVD”).
Single mode to dual mode
Dual mode to single mode
