© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
BII13063-30 (1909)
5 of 6
13. Remove the dashboard meter visor, and disconnect
the VSA OFF switch connector.
14. Remove the gauge control module, and disconnect
the gauge control module connector.
15. Locate the vehicle connector taped to the vehicle
harness. Remove the tape to free the 3-pin
connector, and route the connector to the right of the
dashboard support bracket.
DASHBOARD
METER VISOR
VSA OFF SWITCH
CONNECTOR
CLIPS (5)
CLIPS (5)
SCREW
GAUGE CONTROL
MODULE
SCREWS
3-PIN CONNECTOR
BLUE TAPE
16. Slide the transceiver onto the antenna bracket as
shown.
17. Using the 6 mm screws, secure the bidirectional
antenna to the antenna bracket.
18. Plug the bidirectional antenna into the transceiver,
and secure the clip on the harness to the bracket.
ANTENNA
BRACKET
TRANSCEIVER
ANTENNA
BRACKET
BIDIRECTIONAL
ANTENNA
6 mm SCREW
PLUG
CLIP
