Acura 2012 MDX Owner'S Manual Download Page 151

Page: 151 / 617

If you try to drive off with the tailgate
not closed completely, a beeper
sounds and a

‘‘

DOOR & TAILGATE

OPEN

’’

message is shown on the

multi-information display.

Keep the tailgate closed at all times
while driving to avoid damaging the
tailgate and to prevent exhaust gas
from getting into the interior. See

Carbon Monoxide Hazard

on page

61.

If there is a problem in the power
tailgate system, you will see a

‘‘

CHECK POWER TAILGATE

’’

message on the multi-information
display. Have the system checked by
your dealer.

With this message shown on the
multi-information display, you can
still open or close the tailgate
manually.

Unlocking the Tailgate

If the power door lock system cannot
unlock the tailgate, unlock it
manually.

Use a small flat-tip screwdriver to
remove the cover on the back of the
tailgate.

Push the release lever to the right as
shown.

If you need to unlock the tailgate
manually, it means there is a
problem with the tailgate. Have the
vehicle checked by your dealer.

Tailgate

144

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Summary of Contents for 2012 MDX










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 MDX

Reviews:

Related manuals for 2012 MDX

Brands by name

Popular brands

Acura 2012 MDX, Owner'S Manual

Search results

Summary of Contents for 2012 MDX

Reviews:

Related manuals for 2012 MDX

Brands by name

Popular brands