＊
＊
＊
＊
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It may also come on briefly
when the ignition switch is turned to
the START (III) position.
This indicator has two functions:
It flashes when VSA is active (see
page
).
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch
to the ON (II) position, there is a
problem with the VSA or Hill Start
Assist (on SH-AWD models only)
system. You will also see a
‘‘CHECK VSA SYSTEM’’ or
‘‘CHECK HILL START ASSIST
SYSTEM’’ message on the multi-
information display. Take your
vehicle to a dealer to have it
checked. Without VSA, your
vehicle still has normal driving
ability, but will not have VSA
traction and stability enhancement.
For more information, see page
.
This indicator comes on as a
reminder that you have turned off
the vehicle stability assist (VSA)
system.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II), and
START Mode is the equivalent
of START (III). For more
information, see pages
and
.
If the VSA indicator illuminates,
hill start assist will not be working.
Without hill start assist, the
vehicle will roll downhill
immediately when you release the
brake on an incline.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It may also come on briefly
when the ignition switch is turned to
the START (III) position. For more
information, see page
.
1.
2.
:
178
484
484
484
181
Vehicle Stability Assist
(VSA) System Indicator
VSA Of f Indicator
Instrument Panel Indicators
68
09/07/29 16:53:57 31TK4610_073
2010 TL
