−
−
When you unlock the driver’s door
with your remote transmitter, each
remote transmitter activates the
customized settings related to that
remote.
Here are the settings activated with
the remote;
Customized settings
(see page
).
Press and hold this
button for about 1 second to attract
attention; the horn will sound, and
the exterior lights will flash for about
30 seconds. To cancel panic mode,
press any other button on the remote
transmitter, or turn the ignition
switch to the ON (II) position. Panic
mode does not work when the key is
in the ignition switch.
Press and hold this
button for about 1 second to open
the trunk. You cannot open the trunk
if the key is in the ignition switch.
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
You will also see the ‘‘DRIVER 1’’ or
‘‘DRIVER 2’’ message on the multi-
information display, depending on
which linked remote transmitter is
used.
When you open the driver’s door
after unlocking it with the remote
transmitter, the driver’s seat moves
to the position stored in memory.
You will hear two beeps when the
movement is completed. The
indicator in the related memory
button on the driver’s door remains
on.
Driving position memory
(see page
).
81
142
CONTINUED
U.S. TSX and Canadian TSX Premium
Recalling a Memorized Driving
Position
PANIC
TRUNK
Remote Transmitter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
127
With Driver 2
With Driver 1
０８／０２／０７ １７：３１：１９ ３１ＴＬ１６００ ０１３２
