Acura 2008 TSX, Owner'S Manual

Page: 128 / 390

−
To switch from low
beams to high beams, push the left
lever forward until you hear a click.
The high beam indicator will come
on (see page
). Pull it back to
return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.
Turn the fog lights on and off by
turning the switch next to the
headlight switch.
You can use the fog lights only when
the headlights are on low beam.
They will go off when you turn the
headlights off or onto high beam.
This feature turns off the headlights,
parking lights, taillights, and license
plate lights within 15 seconds of
removing the key from the ignition
switch and closing the driver’s door.
You can change this 15 second timer
to 0, 30, or 60 seconds (see page
).
With the headlight switch in the off
or
position, the high beam
headlights and the high beam
indicator come on with reduced
brightness when you turn the
ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
This feature activates if you leave
the headlight switch in the
or
position, remove the key, then
open and close the driver’s door.
If you remove the key from the
ignition switch with the headlight
switch on, but do not open the door,
the lights will turn off after 10
minutes.
The lights will turn on again when
you unlock or open the driver’s door.
If you unlock the door, but do not
open it within 15 seconds, the lights
will go off. With the driver’s door
open, you will hear a lights on
reminder chime.
66
108
Automatic Lighting Of f Feature High Beams
Fog Lights
(Canadian Models)
Daytime Running Lights
Headlights, Automatic Lighting Off Feature, Daytime Running Lights
122
０７／０５／１７ １７：０３：０６ ３１ＳＥＡ６４０ ０１２７