The Automatic Climate Control
system can adjust the fan speed and
airflow levels to maintain the interior
temperature you select.
Press the AUTO button.
Set the desired temperature with
the temperature control buttons.
You will see FULL AUTO in the
system’s display.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature from its current level to
the set temperature. In FULL AUTO
the rear A/C control panel cannot be
used.
In cold weather, the fan will not
come on automatically until the
heater starts to develop warm air.
You can manually select various
functions of the Climate Control
system when it is in FULL AUTO.
All other features remain
automatically controlled.
Manually selecting a function causes
the word FULL in the display to go
out.
Press the OFF button. However, a
lack of airflow can cause the
windows to fog up. You should keep
the fan on at all times so stale air and
moisture do not build up in the
interior and cause fogging.
If you set the temperature to its
lower or its upper limit, the system
runs at full cooling or heating only. It
does not regulate the interior
temperature.
Select
. The system
automatically switches to Fresh
Air mode and turns on the A/C.
The A/C indicator will not come
on in U.S. vehicles.
Select
.
Set the fan and temperature
controls to maximum level.
To clear the windshield faster, you
can close the dashboard corner vents
by rotating the wheel below each
vent. This sends more warm air to
the windshield defroster vents. Once
the windshield is clear, select Fresh
Air mode to avoid fogging the
windows.
For your safety, make sure you have
a clear view through all the windows
before driving.
1.
2.
1.
2.
3.
Vents, Heating, and A/C
To Remove Exterior Frost or Ice
From the Windows
Manual Operation
To Turn Everything Of f
Using Automatic Climate Control
110
