To load a single CD:
Press and release the LOAD
button.
The CD Loaded indicator for an
empty position will start to blink
the green disc indicator will come
on, and LOAD will appear in the
display. Insert the disc into the CD
slot about halfway, the drive will
pull it in the rest of the way.
The system will load the CD, and
begin playing it.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
When LOAD appears again in the
display, insert the next disc into
the CD slot. Do no try to insert a
disc until LOAD appears. You
could damage the audio unit.
If you are not loading CDs into all six
positions, press the LOAD button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading CDs before all six
positions are filled, and you do not
press the LOAD button, the system
will wait for ten seconds, then stop
the load operation and begin playing
the last CD loaded.
For best results use only high quality
CD-R discs labeled for audio use.
The CD player can only play closed
CD-R recordings. CD-RW discs will
not work in this unit.
Insert the disc into the CD slot
about halfway, the drive will pull it
in the rest of the way. The disc
indicator turns red and blinks as
the CD is loaded.
On the right side of the display,
the CD Loaded indicator for an
empty position will begin blinking
and the green disc indicator will
come on.
Press and hold the LOAD button
until you hear a beep and see
‘‘LOAD’’ in the display, then
release the button.
To load multiple CDs in one
operation:
1.
2.
3.
4.
5.
1.
2.
3.
Audio System
Comf ort and Convenience Features
Loading CDs in the Changer
144
