The remote transmitters will also
activate the Driving Position
Memory System (see page
).
When you open the driver’s door
after unlocking it with the remote
transmitter, you will hear a beep.
The driver’s seat and outside mirrors
move to the positions stored in that
memory location. You will hear two
beeps when the movement is
complete.
If the seat and mirrors are already in
the proper positions, you will hear
three beeps when you open the door.
The driving position memory
activated (Memory 1, Memory 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
To turn it back on, repeat this
procedure. The LED will come on
for one second to indicate the
feature has been turned on.
You can turn the driving position
memory activation off and on. To
turn it off, press and hold the LOCK
and UNLOCK buttons at the same
time for about one second. The LED
in the remote transmitter will blink
twice. Then release the buttons.
118
On Touring Model
Recalling a Memorized Driving
Position
Keys and Locks
Instruments and Controls
98
With Memory 1
With Memory 2
０２／０７／３０ ２１：３８：３９ ３１Ｓ３Ｖ６２０ ０１０３
