© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
BII12440-18 (1906)
3 of 6
3.
Set the front of the kayak on the hydro-glide
assemblies. Standing behind or alongside the kayak,
lift up the rear of the kayak and push it forward onto
the hydro-glide assemblies and saddles. Make sure
the kayak reaches the front saddles before you lower
it.
4617030Y
KAYAK
Lift up the rear, and
slide it forward onto
the roof of the vehicle.
HYDRO-GLIDE
ASSEMBLY
SADDLE
4.
Adjust the distance between the saddles and the
hydro-glide assemblies to the same width as the
kayak, then secure the saddles and the hydro-glide
assemblies by tightening the knobs you installed in
steps 1 and 2.
5.
Slide the kayak forward or backward until it’s level
with the roof. If necessary, loosen the knob on each
saddle and adjust the saddle angle to fit snugly
against the kayak. Tighten each knob securely.
KAYAK
SADDLE
HYDRO-
GLIDE
ASSEMBLY
KNOB
SADDLE
Adjust the
angle.
