6 of 22
BII 45421 (1103)
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
14. Remove the left sunvisor.
•
Pivot the left sunvisor downward.
•
Locate the slot in the sunvisor holder, and insert
a flat-tip screwdriver into the slot. Push in and
hold the retaining tab.
•
While holding the retaining tab, rotate the
sunvisor toward the door to remove it.
•
Unplug the vanity mirror light connector.
NOTE: If the retaining tab did not stay pushed in, return
the left sunvisor to its original position and repeat the
steps above.
A11301AJ
SLOT
HOLDER
Push and hold
the retaining tab.
FLAT-TIP
SCREWDRIVER
LEFT
SUNVISOR
Rotate
towards
the door.
VANITY
MIRROR
LIGHT
CONNECTOR
FRONT
15. Pull away the door opening trim from the left front A-
pillar trim.
16. Using a rubber mallet and a shop towel, tap the left
front A-pillar trim at the position shown to release the
clip.
17. Pull away the door opening trim, and remove the left
front A-pillar trim (one clip, and unplug the vehicle
connector).
830602BT
DOOR OPENING
TRIM
LEFT FRONT A-PILLAR TRIM
CLIP
FRONT
PILLAR
PIN
Strike perpendicularly
to the vehicle.
LEFT FRONT
A-PILLAR TRIM
SHOP
TOWEL
RUBBER
MALLET
CLIP
25 mm
(1.0 in.)
830603AT
LEFT FRONT
A-PILLAR TRIM
CLIP
DOOR OPENING
TRIM
VEHICLE
CONNECTOR
