Acumen Stopwatch, Instruction Manual

Page: 18 / 105

Getting Going
LAP
Step 1: Use the Connector with one end clamp to the watch and the
other end connect with the PC Interface and Charger (for EON-
3068HS) or Charger (for EON-3067HS). Make sure the three pins in the
clamp are properly in contact with the three contacting points on the
watch. (as shown in Figure 2 & 3)
CAUTION
- ONLY CHARGE WITH A RECHARGEABLE,
LITHIUM BATTERY (LIR 2032) AND THE 110-VOLT (1) OR 230-VOLT (2)
A C / D C T R A N S F O R M E R P R O V I D E D . O T H E R B AT T E RY A N D
TRANSFORMER WILL CAUSE INJUREY AND DAMAGE.
(1) For US only (Optional) (2) For European country
The watch must be fully charged before its
initial use.
When the watch displays ì LOW
BATT. î (as shown in Figure 1) means the battery
in your watch need to be charged, please follow
the below sequences to charge the battery:
Charging the Battery
Part I
14
!
Fig.2 Fig.3
Fig.1