9CH Mobile
SVR
Manual
28
1.1-4 IP Camera address
Once the source is set to an IP camera, you can enter the IP address of the IP camera for that
specific channel. To manually set the IP address, press Enter to enable editing via the virtual
keyboard. You can also use WS-Discovery for automatic IP address setup.
1.1-5 IP Camera HTTP port
By default, the
SVR
IP camera ‘HTTP’ port is set to 80. This can be changed if required.
1.1-6 Video RTSP port
By default, the
SVR
IP camera ‘RTSP’ port is set to 554. This can be changed if required.
1.1-7 IP Camera setup
To setup an IP camera, follow these instructions.
•
Camera IP address: the IP address of the IP camera
•
Camera HTTP port: the HTTP port number of the IP address (default 80)
•
Video RTSP port: the RTSP port number of the IP address (default 554)
•
Username: username of the IP camera (default: admin)
•
Password: password of the IP camera (default: pass)
1.1-8 WS-Discovery
Web Services Dynamic Discovery (WS-Discovery) is part of the ONVIF protocol for searching IP
cameras on a LAN.
