HD IP Video Decoder AiP-D Manual
5
User Guide
Chapter 1: Basic Operation
1.1 HD IP Video Decoder AiP-D6 rear panel
HD IP Video Decoder AiP-D LED Panel
The status of each LED is described in the table below:
LED
Description
Colour
RESET
Manufacturing default button
POWER
Constant on
Green
ACT
Network ACT LED
Green (flashing)
LINK
Network LINK LED
Orange
Extra IR
To use IR remote control, first connect the IR receiver to the HD IP Video Decoder
RESET
Hardware Factory Default
Use hardware to restore factory default settings, follow these steps:
1. Hold Load Default Button for 10 seconds, then release.
2. Green and Yellow Network LED blinks, On->Off->ON.
3. HD IP Video Decoder AiP-D has completed the factory default settings, and then reboot.
Note: Do not connect any devices to ‘Keyboard In’ other than the keyboard as the connection
contains 12VDC and may damage other devices.
Note:
Hardware Factory reset does affect IP address, video system, and language settings.
