IM-350
HOLOPHANE
®
Pedestrian LED
Installation and
Luminaire
Series
Maintenance
Manual
AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER
ESPLANADE®
MEMPHIS
GR395, GR804A
1 INTRODUCTION
1.1 Product Description
.
•
The fixture line is designed to operate LED light sources up to
115 watts.
•
This fixture must be serviced by trained electrical personnel.
•
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
1.2 Alternate Information Sources
.
Holophane
Field Service Department
P.O. Box 3004
Newark, OH 43058-3004
(740) 349-4182
2 INSTALLATION
2.1 Tools and Materials Required
.
TABLE 1. Installation Tools and Materials
DESCRIPTION USE
Flat blade screwdriver
Terminal block connections
Pendant Mount:
3/16” Allen wrench Setscrew
Pipe Thread Sealant
Mounting pipe threads
3/8” Socket
Closure screw (Esplanade only)
Stem Mount:
1/8" Allen wrench
Setscrew
3/16” Allen wrench Setscrew
1/4” Allen wrench Setscrew
9/16” Socket
Nuts
3/8” Socket
Screws
2.2 Fixture Installation.
2.2.1
Remove the mounting assembly from the electrical
housing by loosening the closure screw or latch and then swinging
the mounting assembly open on the mounting assembly hinge until
the hinge disengages. Disconnect the electrical connector from
the mounting assembly. See Figure 1.
2.2.2
Loosen the wire chamber cover screws and remove the
wiring chamber cover. Allow it to hang by the electrical wires
attached to the terminal block. See Figure 1.
