26
INSTALLATION GUIDE
26
Wall Mounting of Chimney Fan
When mounting the chimney fan on a wall, the instal
-
lation instructions for installation on a steel chimney
should be followed. Use of the adapater SCA can
make the installation easier.
To ease installation, detach the fan base by removing
the bolts holding the hinges together. Center the fan
base over the outlet and bolt the base onto the wall
with the hinges pointing upwards.
After mounting the base securely, attach the fan mo
-
tor housing by reassembling the fan hinges. Seal with
high temp silicone all around the edges.
High temp
silicone
Chimney Fan
Under conditions with extremely strong winds
surrounding the top of the chimney, the chimney fan
must be secured by steel wires supplied with the fan.
CAUTION
Step 1: Prepare fan location
The steel chimney adapter (SCA) slides right into the
chimney, where the long collar engagement ensures
safe anchoring.
Step 2: Preparation of fan
Locate the installation brackets in the grooves on the
underside of the fan base, using the bolts and nuts
supplied to secure the brackets. Note that the bolts
shall be installed from the bottom side in the two inner
holes.
Adjust the final position of the installation brackets
ensuring that there is a small gap between the brack
-
ets and the flue wall/adapter throat. Tighten the nuts.
If the brackets touch the flue wall, it may create some
vibration noise.
Step 3: Attaching the fan
The chimney fan is now ready for installation on the
top of the chimney. It is not necessary to bolt the fan
to the chimney.
BOLT
BOLT
BL_ST_INSTL_RevB_4.08.19
