ACU-RITE MILLPWR G2, Technical Manual

Page: 472 / 546

472 ACU-RITE Technical Manual MILLPWR
G2
The following general data is displayed in the bottom display line:

Connected: Indicates the software or function area to which the OLM is
connected
• Ipo
• SimIpo
• PLC
• none: No connection

IpoCounter: Counts the IPO clock pulses
Note: The contents of the IpoCounter are also stored for trace information
and error messages.

Ax/Chn-Number: Logical axis number or channel number (depends on the
selected function)
• Number at left: Left column
• Number at right: Right column
If the number of variables displayed exceeds the capacity of the main window,
use PageDown/PageUp to scroll to the next/previous group of variables. One
group consists of eight displayed variables.
Units The OLM displays data in the following units:

For linear axes
• For position, length, etc: in [mm]
• For speed: in [mm/s]
• For acceleration: in [mm/s2]

For rotary axes (spindles)
• For position, etc: in [°]
• For speed: in [°/s]
• For acceleration: in [°/s2]