ACU-RITE Atomic Clock Instruction Manual Download Page 2

A

B

C

D

E

F

Battery Compartment
Reset Signal Button
Manual Set Button

Receive Atomic Signal Button
Time Zone Switch
Daylight Saving Time (DST)

On/Off Switch

Instruction Manual

Atomic Clock

LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of 
defects if properly installed and operated for a period of one year from date of purchase.  REMEDY FOR BREACH OF THIS 
WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS.  Any product which, under normal use 
and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by 
Chaney, and at its sole option, be repaired or replaced by Chaney.  In all cases, transportation costs and charges for returned 
goods shall be paid for by the purchaser.  Chaney hereby disclaims all responsibility for such transportation costs and charges.  
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal 
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than 
authorized representatives of Chaney.

THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL 
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF 
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  CHANEY EXPRESSLY DISCLAIMS 
ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM 
ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS 
ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW.  BY ACCEPTANCE 
OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES 
ARISING FROM THEIR USE OR MISUSE.  NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY 
OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS.  FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS 
AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN 
WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND 
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For warranty claims, please contact:
Customer Care Department
Chaney Instrument Co.
965 Wells Street
Lake Geneva, WI  53147
www.AcuRite.com

This device complies with part 15 of the FCC rules. Operation is subject to the 

following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that 

may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, There is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the            

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized 

modifications to this equipment. Such modifications could void the user authority to operate the 

equipment.

ATOMIC INST 071012

A

B

C

D
E
F

Summary of Contents for Atomic Clock






Reviews: