WEATHER ALARMS:
Each weather category (example- “OUTDOOR TEMP” category
shown below) features alarm options. The alarm options are
displayed to the left of the currently selected weather category.
Alarms are all set to “OFF” by default upon powering on the display
console.
NOTE: Some weather categories will only have either low alarm OR
high alarm options. For example, WIND SPEED only has a HIGH
wind speed alarm. In these cases, only the relevant alarms for the
selected weather category may be set.
ALARM VALUE ADJUST MODE:
To adjust an alarm value for the currently selected weather category,
press AND HOLD the “ALARM” button for the alarm you wish to set.
Note the adjust (ADJ) indicator
TURNING ALARMS ON or OFF:
After you have adjusted and set an alarm value, you will note that
the alarm is
NOT
automatically turned on. This is done to help prevent
“false alarms” and also allows you to set all your preferred alarm
values ahead of time without having to turn them all off when you
are finished.
To turn an alarm ON, press the alarm button. You will note the
“OFF” will change to “ON” momentarily, and then the alarm value
will be displayed. This alarm is now “ON”, and the display console
will alert you when this value is reached with an audible alarm and
an alarm icon indicator on the display.
SILENCE A SOUNDING ALARM:
When an alarm is sounding, the weather category display will
automatically change to show the affected category and alarm
(flashing). The affected weather data on the display console will also
flash.
The alarm will sound initially for a few minutes, then silence itself.
The alarm will then sound every few minutes afterwards until one of
the following takes place.
1. “SNOOZE”- To silence a sounding alarm, press any button. This
will act similar to the “SNOOZE” function on an alarm clock. The
alarm will silence, but will sound again if the alarm condition still
exists later.
2. Turn the alarm “OFF”- The only way to permanently silence any
potential alarms is to turn the alarm “OFF”.
To adjust the alarm value, press the down or up buttons. When you
are finished making adjustments to the alarm value, press the
“ALARM” button again to confirm your adjustments.
Weather Category Alarm Functions
USE
USE
press and HOLD “ALARM”
to enter into adjust mode
ADJ
press “ALARM” to
turn alarm on or off
press to adjust
the alarm value
down or up
21
20