ACU-RITE 02050CCDI, Instruction Manual

Page: 12 / 16

Calibration
Calibrat e Temper ature and Humidity
The indoor / outdoor tem peratur e and humidity readings can be calibr ated on
the displa y unit to im prov e accuracy . Calibration can im prov e accuracy when
sensor placement or envir onmental f actors im pact your dat a accuracy .
1. To access calibr ation mode, press AND HOLD t he “
▲
”, “Set”, and “
▼
”
buttons (locat ed on the bac k of the displa y unit) for at least 5 seconds.
2. Once in calibr ation mode, the pr efer ence you ar e currentl y setting will
blink on the displa y.
3. Pr ess the “
▲
” or “
▼
” buttons t o calibrat e the dat a value higher or lo wer
from t he actual reading.
4. Pr ess the “Se t” button t o confirm t he calibration adjustment. The “ ” icon
will remain illuminat ed next t o calibrat ed values.
5. The ne xt adjustable dat a will begin flashing, indicating it is ready t o be
calibrat ed. Repeat S teps 1 - 4 t o calibrat e additional data.
After 5 seconds of inactivity , the displa y will save t he adjustments and exit
calibration mode. N ote: Calibr ations will be erased if t he display is r eset or if
batter ies are r emoved and t he pow er adapter is un plugged.
Calibrat e Barome tric Pr essure
The weat her station def ault pressur e mode is “AUT O.” In aut o mode, the
pressur e will calibrat e itself over a 1 4 day Lear ning Mode. Barome tric pr essure
can be manually calibr ated:
1. Press AND HOLD t he “Set” butt on (located on t he back of t he display unit)
for at least 1 0 seconds to ent er manual pressur e mode.
2. The un-calibr ated pr essure will be displa yed. Pr ess AND HOLD the “
▲
”,
“
▼
”, and “Set” butt ons for at least 5 seconds.
3. Pr ess and release t he “Set” butt on until barome tric pr essure is flashing.
4. Pr ess the “
▲
” or “
▼
” buttons t o calibrat e the dat a value higher or lo wer
from t he actual reading.
5. Pr ess the “Se t” button t o confirm t he calibration adjustment.
Not e: The “ ” icon will remain illuminat ed next t o the calibr ated v alue.
After 5 seconds of inactivity , the displa y will save y our adjustments and exit
calibration mode. N ote: Calibr ation will be erased if t he display is r eset or if
batter ies are r emoved and t he pow er adapter is un plugged
To e xit manual pressur e mode and retur n to aut o mode press and hold t he
“Set” butt on for at least 1 0 seconds.
12