background image

Set the Time, Date & Units 

Press the “   ” button, located on the back of the display, to enter SET MODE. 

Once in set mode, the preference you are currently setting will blink on the 

display. 
To adjust the currently selected (flashing) item, press and release the “

 

“ or 

“  “ buttons (press and HOLD to fast adjust). 

To save your adjustments, press and release the “   ” button again to adjust 

the next preference. The preference set order is as follows: 

TIME ZONE 

(EST CST MST PST AKT HAT AST) 

DST 

(Daylight Saving Time ON or OFF)* 

CLOCK HOUR 
CLOCK MINUTE 
CALENDAR MONTH 
CALENDAR DATE 
CALENDAR YEAR 
TEMPERATURE UNITS

 (ºF or ºC) 

PRESSURE UNITS

 (inHg or hPa) 

WIND UNITS

 (MPH or KPH) 

You will automatically exit SET MODE if no buttons are pressed for 10 seconds. 

Enter setup mode at any time by pressing the “   ” button. 

*If you live in an area that observes Daylight Saving Time, DST should be set 

to ON, even if it is not currently Daylight Saving Time. 

Display Backlight Settings 

This weather station’s color display features three different lighting settings: 

High (100%) brightness, Medium (60%) brightness and Low (30%) brightness. 
Using battery power alone, the backlight is available momentarily for 10 

seconds by pressing the “  ” button. 
When display is powered with the power adapter, backlight remains on  

at 100% brightness. Press “  ” button once to dim to 60% brightness;  

press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode. 

“AUTO DIM” icon appears below the clock. 

AUTO DIM MODE: 

Automatically adjusts display brightness based on time of day & year. 

MARCH 11- NOVEMBER 4 

6:00 a.m. - 9:00 p.m. = 100% brightness 
9:01 p.m. - 5:59 a.m.= 30% brightness 

NOVEMBER 5 - MARCH 10 

7:30 a.m. - 7:00 p.m.= 100% brightness 
7:01 p.m. - 7:29 a.m. = 30% brightness 

Summary of Contents for 01604





















Reviews: