|5
EN / Soladin Web DC Switch
2 SaFETY GUIDELINES aND WaRNINGS
2.1 WaRNINGS aND SYMbOLS
Safety instructions and warnings are marked in this manual
by the following pictograms:
A procedure, circumstance, etc which deserves
extra attention.
CaUTION!
Special information, commands and
prohibitions in order to prevent damage.
WaRNING
A WARNING refers to possible injury to the
user or installer or significant material damage
to the Soladin Web DC Switch if the installer /
user does not (carefully) follow the stated
procedures.
2.2 USE FOR INTENDED PURPOSE
Use the Soladin Web DC Switch only in installations that
meet these qualifications:
• in permanent installations;
• the electrical installation must meet the applicable regula-
tions and standards, must be carried out correctly and must
be in a good condition;
• according to the technical specifications.
WaRNING
Never use the Soladin Web DC Switch in situ-
ations where there is danger of gas or dust
explosion or potentially flammable products!
Use of the Soladin Web DC Switch other than
as mentioned under § 2.2 is not considered to
be consistent with the intended purpose. Mas-
tervolt does not hold itself liable for any damage
resulting from the above.
2.3 ORGaNISaTIONaL MEaSURES
The installer / user must always: have access to this manual;
be familiar with the contents of this manual. This applies
particularly to Chapter 2, Safety Guidelines & Warning.
2.4 INSTaLLaTION, MaINTENaNCE aND REPaIR
WaRNING
As high voltages exist, only allow installation,
maintenance and repair of the Soladin Web DC
Switch and changes in your electrical system to
be carried out by qualified electricians. Con-
nections and safety features must be executed
according to the locally applicable regulations.
If such are required, only use original spare
parts
Use the special Amphenol tool when taking the
Amphenol connectors apart.
2.5 WaRNING OF SPECIaL DaNGERS
The voltages present at both sides of the
Soladin Web DC Switch and inside the
enclosure are not safe to touch. Do not work
on the Soladin Web DC Switch and/or the
electrical installation if it is still connected to
the PV panels or the inverter. Allow time for the
inverter capacitors to de-energize. Verify de-
energizing of all connections using a suitable
metering instrument.Make sure two persons
are present when working on an installation,
at least until the installation has been de-
energized and verified by a suitable metering
instrument.