Operation Manual - RC-03 Controller
Document: 9590-4017
Ver. 1 220318
Operation Manual
Remote Controller
13
GEAR Function (not available for Mini-Cassette)
Gear mode is a setting that can limit the energy consumption output of the air conditioner if the end user desires
reduction in their overall system energy usage.
This will impact performance in some conditions.
Press the
button to enter the following:
75%(up to 75% electrical energy consumption)
50%(up to 50% electrical energy consumption)
Previous setting mode.
06.09. SET Function
1. Press the
SET
button to enter the function setting.
2. Keep pressing the
SET
or
or
buttons
to select the desired function. The symbol of the selected function
will flash on the remote control display.
3. Press the
OK
button to confirm.
Available SET functions are as follows:
Active Clean*
Fresh*
Sleep
Follow Me
AP Mode
Active Clean*
.....
*These functions will are disabled when not available with the unit. Selecting this function will not send any command to
the unit.
•
ACTIVE CLEAN Function (not available for Mini-Cassette)
The Active Clean Function washes away accumulated dust, mold, and grease that may cause odors when it
adheres to the heat exchanger. The unit will automatically freeze the heat exchanger and then rapidly thaw the
frost to wash and drain away the accumulated dirt.
When this function is activated, the indoor unit display window shows
, after 20 to 45 minutes, the unit will
turn off automatically and cancel Clean function and return to previous operation.
•
FRESH Function (not available for Mini-Cassette and Cascade)
When the FRESH function is initiated, the Ionizer/Plasma Dust Collector (depending on models) is energised and
will help to remove pollen and impurities from the air.
NOTE
This function may not remove all contaminants form the unit and it is recommended to have the system
professionally serviced for a thorough clean.
•
SLEEP Function
When sleep function is activated it adjusts and maintains the temperature while you sleep and can save energy.
For more detail on this function please refer to
Sleep Operation
in
Owner’s Manual
.
NOTE
The SLEEP function is not available in
FAN
or
DRY
mode.