Page 8
1. Press the
MODE
button to select Auto.
2. Press the
UP/DOWN
button to set the desired
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1°C increments.
3. Press the
ON/OFF
button to start the air conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating by
sensing the difference between the actual ambient
room temperature and the setting temperature on
the remote controller.
2. In the Auto mode, you can not adjust the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you, the
desired mode can be selected manually.
1. Press the
MODE
button to select COOL, HEAT or FAN
mode.
2. Press the
UP/DOWN
buttons to set the desired
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1°C increments.
3. Press the
FAN
button to select the fan speed in four
steps - Auto, Low, Med or High.
4. Press the
ON/OFF
button to start the air conditioner.
NOTE
In the FAN mode, the room temperature is not controlled
and the set temperature will not be displayed on the
remote controller. In this case, only step 1, 3 and 4 may
be performed.
1. Press the
MODE
button to select DRY mode.
2. Press the
UP/DOWN
buttons to set the desired
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1°C increments.
3. Press the
ON/OFF
button to start the air conditioner.
4. System Operation
Remote Control
Auto Operation
Cooling / Heating / Fan Operation
Dehumidifying Operation (Dry Mode)
NOTE
In the Dehumidifying (dry mode), you can not adjust the
fan speed, as it will be automatically controlled.
3
1
2
COOL
TEMP.
3
1
2
COOL
TEMP.
4
1
2
3
COOL
TEMP.
