Page 7
Operation Mode selection
While simultaneously operating two indoor units or more,
make sure the operation modes will not conflict with each
other. The heat mode claims precedence over all other
modes. If the unit initially started operates under heat
mode, the other units can operate under heat mode only.
For example: If the unit initially started operates under cool
(or fan) mode, the other units can operate under any mode
except heat. If one of the unit selects heat mode, the other
operating units will stop operation and display ”--”.
Energy Saving Tips
Do not
set the unit to excessive temperature levels.
• While cooling, close the curtains to avoid direct sunlight,
closing the curtains while heating will also keep the heat in.
• Doors and windows should be kept closed to keep cool or
warm air in the room.
• Do not
place objects near the air inlet and outlet of the
unit. This will reduce the efficiency of the unit.
• Set a timer and use the built-in SLEEP mode if applicable.
• If you don’t plan to use the unit for a long time, remove the
batteries from the remote control.
• Clean the air filter every two weeks. A dirty filter can reduce
cooling or heating efficiency.
• Adjust louvres properly and avoid direct airflow.
Optimal Operation
To achieve optimal performance, please note the following:
• Adjust the air flow direction correctly so that it is not
directed on people.
• Adjust the temperature to achieve the highest comfort
level. Do not adjust the unit to excessive temperature
levels.
• Close doors and windows on COOL or HEAT modes, or
performance may be reduced.
• Use TIMER ON button on the remote controller to select
a time you want to start your air conditioner.
• Do not put any object near air inlet or air outlet, as the
efficiency of the air conditioner may be reduced and the air
conditioner may stop running.
• Clean the air filter periodically, otherwise cooling or
heating performance may be reduced.
• Do not operate unit with horizontal louver in closed
position.
3.
Operation and Maintenance
Multi Split System
NOTE
While simultaneously operating two indoor units or
more,
Do not
use the
AUTO MODE
function as this may
cause mode conflict between the units and display an
error code on one of the units.
Summary of Contents for MULTIELITE MRC-052AS-2
Page 2: ......
