Operation Manual
Zone Controller
Operation Manual LM-ZC-2 Wall Controller
Document No. 0525-082
Ver. 1 190918
Page 8
3. Press the
Button again to select
HIGH
,
MED
,
LOW
fan speed.
4. All open zones will circulate air throughout your home.
5. If you wish to shut any particular zone in this mode, simply turn Off zone by pressing the designated zone button.
Zone LED will go off.
Zone Controller
FAn
will be displayed on zone control display when the Master Wall Controller is set to circulation operation. During
this period, zone damper will be in fully open position for maximum air circulation.
If you do not want the unit to circulate airflow in your room in this mode, simply press the
Button on your zone
controller or turn your zone Off at the Master Wall Controller.
11. Zone Temperature Display
NOTE
Room temperature displayed can be the temperature at a zone controller or at a remote sensor or the average of both
depending on your installation set up.
To Check Temperature at Master Wall Controller
Average Room Temperature Display
1. Press the
or
Buttons on the Master Wall Controller and the average room temperature will be displayed
for 3 seconds.
INSIDE
,
o
C
and
“. “
will be flashing. The temperature displayed is the average of all zones that are
currently on.
Checking Individual Zone Temperature
1. While
INSIDE
,
0
C
and “
.
“ are flashing, press the zone to be checked.
•
INSIDE
and
0
C
will turn Off. The selected zone LED and “.” flashes.
•
During this time, the selected zone temperature is displayed.
2. To check another zone, simply press other zone button while the previous zone LED and “
.”
are flashing.
