TXV REPLACEMENT - PACKAGE UNIT
4
Tri-Capacity Package - TXV Replacement
Doc. 9590-2014-19B Ver. 3 211105
10. Securely tighten bolt ensuring the correct positioning as the previous one installed or as per above table in item 6.
ACCUMULATOR
SMALL COMPRESSOR PIPING
ACCUMULATOR
BIG COMPRESSOR PIPING
SUCTION PIPE
TXV BULB
SENSOR
TXV BULB
STRAP
DETAIL A
NOTES
• Make sure that the total length of the bulb is in good contact with suction line pipe.
• Check that equal lengths of the bulb are protruding from each side of the strap.
• Securely fastened bulb unto suction line.
• Always install bulb on the horizontal part of the suction line where the previous one was installed.
