3-10
Using the Tool
3.6.2
Display
Test
This is a self-test to inspect the AutoScanner’s LCD display. The
test will turn every pixel black.
Select
Display
Test
from the
Tool
Setup/Test
menu and press
ENTER
.
The display will toggle between the two following screens every
3 seconds. Look for missing spots in the solid black characters.
When done, press the
BACK
key to return to the
Tool
Setup/Test
menu.
3.6.3
Keypad
Test
The
Keypad
Test
is used to check the functionality of the
AutoScanner’s Keypad.
Select
Keypad
Test
from the
Tool
Setup/Test
menu and press the
ENTER
key.
Each time you press a key, its name
should appear on the display. For
example, if you press the
▲
/YES
key, the screen will display
“UP / YES.” If key’s name does not
display, then the key is not working. Press the other keys to verify
proper operation.
Check the
BACK
key last. When
the
BACK
key is pressed, the
AutoScanner will return to the
Tool
Setup/Test
menu. If you are not
returned to this menu, then the
BACK
key is not working.
Tool Setup
2)Display Test
LCD Test
Press BACK To Quit
Tool Setup
3)Keypad Test
UP / YES
Press Any Key
BACK
Leaving Keypad Test
