(8) #8 - .75
1/4” Self-tapping screws
Item # US70679
(4) #6 - 32 X 2 inch
Threaded bolts
Item #US70680
(4) #6 - 32
Toggle bolt wall anchors
Item # US70682
(4) #8 - 32
Hex nuts
Item # US70681
Safety
Switch
CONTENTS
2
3
on your purchase of an InDuct 2000 LV air
purification enhancement system. This unit
is designed to be installed into an existing
HVAC system. Please read and follow all service
procedures outlined in this manual. Use only
genuine activTek replacement parts available
from your Distributor.
If you have any questions concerning this or any
activTek product, contact your Distributor.
Please record the name and phone number of
your activTek Distributor:
Name __________________________________
Phone _________________________________
Please record the serial number of your InDuct
2000 LV:
Serial # _________________________________
CONGRATULATIONS . . .
REPLACEMENT PARTS
Base Unit
• Ozone-Free ActivePure® Cell
Item # US71088
• Ballast
Item # 9950102
• Power Cord
Item # 9950103
INSTALLATION HARDWARE (SUPPLIED)
This owner’s manual is also available online at:
http://www.activTek.net.
activTek Environmental, 300 East Valley Dr., Bristol, VA 24201, www.activTek.net
ASP_BL_62-00000_V
A-00000_0
312
HG-LAMP CONTAINS MERCURY. Manage in
accordance with disposal laws: www.lamprecycle.org.
activTek INDUCT 2000 LV
24 volt, Item # 00000000
RESIDENTIAL HVAC AIR PURIFICATION SYSTEM
UV bulb indicator
Replaceable ActivePure®
Cell (includes UV Lamp)
Mounting
Plate
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Induct 2000 LV . . . . . . . . . . . . . . . . . . 2
Product Contents. . . . . . . . . . . . . . . . . . . . . . . 3
Installation Hardware. . . . . . . . . . . . . . . . . . . 3
Replacement Parts . . . . . . . . . . . . . . . . . . . . . 3
Recommended Installation Tools. . . . . . . . 3
Installation Requirements. . . . . . . . . . . . . . . 4
Metal Ductwork Installation . . . . . . . . . . . . 5
Fiberglass Ductwork Installation . . . . . . . . 6
Maintenance/UV Lamp Indicator. . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the ActivePure® Cell . . . . . . . . . 13
Changing the Ballast . . . . . . . . . . . . . . . . . . 14
Features:
Ozone Production:
• 0.02 ppm maximum with standard
replaceable ActivePure® Cell.
• 0.00 ppm with ozone-free
replaceable ActivePure® Cell.
Electrical:
• 18-32VAC ~50/60Hz
• Current: 1.0A,
• Power Factor: 0.99
• Power: 18 Watts
Mechanical:
• Distribution via air handler.
Dimensions:
• 8.5” x 8.5” x 11”
(21.59cm x 21.59cm x27.94cm)
• Weight: 3 pounds (1.2 kg.)
Operating Temperature:
• 32-120°F
Coverage:
• Up to 2000 ft
2
(186 m
2
)
Warranty:
• Limited 3 years.
SPECIFIC
A
TIONS
InDuct 2000 LV by activTek is easily mounted into
the supply side of air conditioning and heating
system air ducts where many problems can start.
Optional ozone-free units are available with the same
basic components and an ozone-free bulb. Note that
odor reduction is dependent on low level ozone. The
InDuct 2000 LV provides 0.02 ppm or less of ozone. If
odor reduction is required, the standard ActivePure®
Cell is recommended.
Location for Protective Earth Line.
WARNING!
- UV Light in operation.
Disconnect unit from power supply before
servicing. Failure to follow warnings may
result in severe eye damage and electrical
shock.
WARNING!
- This unit must be installed
by a licensed HVAC contractor. Failure to
do so will void warranty of the product.
WARNING!
- To prevent damage
to the unit, operating environment
temperature must never exceed 120˚F.
WARNING!
- This unit must never be
used with an extension cord.
RECOMMENDED INSTALLATION TOOLS
3 1/2” Hole Saw
for wood or metal
(recommended)
Drill/Power Driver
Phillips
Screwdriver
3/8” Drill Bit
(if installing into fiberglass
ducting with toggle bolts)
You may also need:
Utility Knife
Tin Snips
(for metal ductwork)
11/32” Open-
End Wrench
1/4
1/4” Nut Driver
Bit
CAUTION: When the unit is
installed in a roof mounted
HVAC system, the unit must be
protected from the elements.
Dust Mask
PRODUCT CONTENTS
Power
Cord
WARNING!
- Do not connect this unit
to any voltage source above 32 volts.
Doing so will cause damage to the unit.
ActivePure® Cell
Item # US70678
