background image

Part No. 65-00367

5420 LBJ Freeway, Suite 1010
Dallas, TX 75240 
1.866.736.0503

This equipment has been tested and 
found to comply with the limits for 
Industrial, Scientific, and Medical 
Equipment (ISM), pursuant to Part 
18 of the FCC Rules.  These limits 
are designed to provide reasonable 
protection against harmful interference 
in a residential installation.  This 
equipment generates, uses, and 
can radiate radio frequency energy, 
and if not installed and used in 
accordance with the instructions, may 
cause harmful interference to radio 
communications.  However, there is 
no guarantee that interference will 
not occur in a particular installation.  If 
this equipment does cause harmful 
interference to radio or television, 
which can be determined by turning 
the equipment off and on, the user 
is encouraged to try to correct the 
interference by one or more of the 
following measures:

Reorient or relocate the receiving 
antenna.

Increase the separation between the 
equipment and receiver.

Connect the equipment into an outlet 
on a circuit different from that to which 
the receiver is connected.

Consult the Dealer or an experienced 
radio/TV technician for help.

FCC DECLARATION OF CONFORMITY

Name:

 DBG Group Investments, LLC

Model:

 DuctwoRx

Manufacturer:

 DBG Group Investments, LLC

This device complies with Part 18 of the  

FCC Rules.

RESPONSIBLE PARTY 

DBG Group Investments, LLC 

dba activTek Environmental 

5420 LBJ Freeway, Suite 1010 

Dallas, TX 75240
Ph: (800) 989-2299

Signature:

___________________________

Printed Name:

 Andy Eide

Title:

  

Vice President of Product  

 

 

Development and Research

Date:  

1/02/2010

*P65-00367*

DW_OM_65-00367-

VA

-00123-0910

Summary of Contents for DUCTWORX

















Reviews: