5
When turning the ActivePure Beyond Guardian on, turn the speed control to maximum airflow for
a few minutes of fast initial cleaning. Then adjust the control to the desired speed.
There are four settings on the ActivePure Beyond Guardian:
1. HEPASilent™
2
Moderate fan speed (for normal use)
3
High fan speed (for a large room)
4
Maximum operation (for fast initial cleaning)
For best results, run your ActivePure Beyond Guardian 24 hours a day, 7 days a week. Continuous
operation means you get a continuous supply of clean, purified air circulating throughout the
room. Open windows and/or doors may affect the performance.
NOTE:
Safety switch automatically turns power off when door is opened.
M A X
a i r f l
o w
H E P
A s i l e
n t ™
Our units are designed for maximum improvement of indoor air with minimum impact on the environment.
•
The ActivePure
®
HEPA particle filter is made of polypropylene, an eco-friendly plastic; unlike other common filters, our filter
contains no aluminum, triclosan or other chemical additives
•
All major parts are made from high-quality galvanized steel, not plastic; the steel housing is noise-muffling, providing quiet
operation; the external parts have been powder coated for endurance and environmental protection
•
The ActivePure Beyond Guardian is energy efficient; from lowest to highest speed, it uses from 23 to 80 watts – no more
than a lightbulb
•
ActivePure
®
air purification systems are built for years of use
KEEP YOUR ACTIVEPURE BEYOND GUARDIAN LOOKING GOOD AND WORKING WELL
The ActivePure Beyond Guardian features award-winning design, materials and workmanship.
Keep your unit in top condition with these cleaning tips:
•
Always unplug unit before cleaning
•
Wipe the exterior with a soft, clean, damp cloth
•
Vacuum the small inlets on each end panel with a soft brush attachment
•
Clean inside the ion chamber by opening the front door of the unit and opening the door of the ion
chamber (right-hand side)
•
Never clean with gasoline, chemical solvents or corrosive materials – they may damage the surface
A IR
P U
R IF
I C A
T IO
N
S Y S
T E M
H E P
A s i
l e n
t
™
M A
X
a i r
f l o w
To maintain optimal performance, the UVC bulb should be replaced every 12 months and the ActivePure
®
Cell every 12 months.
The UVC bulb and ActivePure
®
Cell must be replaced by an ActivePure
®
representative. For service, contact your sales representative
or ActivePure
®
Customer Service for further assistance at 800.572.1446 or email [email protected].
ActivePure
®
HEPA technology makes the ActivePure Beyond Guardian incredibly quiet. Units come with one HEPASilent™ particle
filter (installed).
The ActivePure
®
HEPA particle filter is made of polypropylene, which mechanically filters out airborne particles (dust, pollen, pet dander,
mold spores and other airborne particles). To maximize filter effectiveness, particles are negatively charged before reaching the filter.
For optimal performance, ActivePure
®
recommends that you replace filter at least every 6 - 12 months, depending on usage.
NOTE:
Use only ActivePure
®
HEPA particle filters to ensure proper functioning and to qualify your unit for full warranty coverage.
ACTIVEPURE
®
CELL
FILTERS
MAINTENANCE
SETTINGS