ActivePure A1040F Manual Download Page 3

3

CAUTION

Read this manual in its entirety before using your ActivePure Surface & Air Guardian

• 

Keep out of the reach of children

• 

NEVER

 place your unit where it may fall into a bathtub or other water container; to protect against electrical 

hazards, 

DO NOT

 immerse in water or other liquids 

• 

DO NOT

 touch the control panel or plug with a wet hands

• 

DO NOT

 run cord under carpeting; 

DO NOT

 cover cord with throw rugs, runners, or similar coverings; arrange 

cord away from traffic area and where it will not be tripped over

• 

DO NOT

 insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric 

shock or fire, or damage the air cleaner

• 

To prevent a possible fire, 

DO NOT

 block the air intakes or exhaust in any manner; 

DO NOT

 use on soft surfaces, 

like a bed, where openings may become blocked 

• 

To avoid fire or shock hazard, plug the unit directly into an electrical outlet 

• 

To disconnect the unit, turn controls to OFF, then remove plug from outlet; pull firmly on the plug, 

DO NOT

 

unplug by pulling on the cord

• 

Always unplug the unit before moving or cleaning, or whenever the unit is not in use

• 

DO NOT

 use outdoors or on wet surfaces 

• 

DO NOT

 attempt to repair or adjust any electrical or mechanical functions on this unit, doing so will void  

your warranty

• 

Connect to properly grounded outlets only 

• 

To reduce the risk of electrical shock, do not change the plug in any way; 

DO NOT

 use adapters

•  Allow your ActivePure

®

 Surface & Air Guardian to warm to room temperature before 

operating; damage may result from turning on a cold unit

•  Do not operate unit near heat sources, open flame, or combustible vapors or gases

•  Eye damage may result from directly viewing the light produced by the lamp used in this  

product; always turn off & unplug unit before removing filters or bulbs

•  Do not operate this unit without the Filter Assembly and Back Cover installed
•  Disconnect power cord before servicing
•  When using electrical appliances, basic precautions should always be followed to reduce 

risk of fire, electric shock, and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

WARNING

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for A1040F

















Reviews: