For service assistance, please call your authorized ActiveCare dealer.
19
Spitfire 1310/1410 Owner’s Manual
Table 2: Scooter Controller Internal Diagnostics
Flash
code
Possible Cause
Solution
1
The battery needs charging or
there is a bad connection to the
battery.
Check the connections to the
battery. If the connections are
good, try charging the battery.
2
There is a bad connection to the
motor.
Check all connections between
the motor and the controller.
3
The motor has a short circuit to a
battery connection.
Please contact your Authorized
Service Center.
4 Not
available
5 Not
available
6
The controller is being inhibited
from driving.
Check the battery charger
connector.
Remove the battery charger from
the scooter.
7
A speed control lever fault is
indication.
Make sure that the speed control
lever is in the rest position before
switching on the scooter.
8
A controller fault is indicated.
Make sure that all connections
are secure.
9
The parking brake has a bad
connection.
Check the parking brake and
motor connections. Make sure
the controller connections are
secure.
10
Excessive voltage has been
applied to the controller.
Check the battery connections.
This is usually caused by a poor
battery connection.
