For service assistance, please call your authorized ActiveCare dealer.
7
Renegade/P24 Owner’s Manual
Assembly
Your new ActiveCare Power Wheelchair comes packaged with all of the following.
Please locate all pieces before beginning assembly.
1 ActiveCare Power Wheelchair
1 Seat
2 Armrests
1 Headrest
1 Controller with Arm
1 Battery Charger
1 Tool Packet
2 Batteries
2 Star Knobs
1 Owners Manual
1
NOTE:
The illustrations provided may not reflect your actual unit.
1. Lift the cover shroud upward to remove it. The cover
shroud is held in place by hook and loop fasteners.
2. Install the seat post into the seat tube in the wheelchair’s frame to the
desired height. From behind the product, looking forward, insert the seat
bolt into hole on the left side of the seat post mount in the wheelchair’s
frame, ensuring the bolt passes through the seat post. Insert the bolt so
that it passes all the way through to the hole on the opposite side. Install
the washer and nut and tighten them using the included flat wrench.
1
NOTE:
Ensure that the seat post is aligned so that the two flanges
with holes are facing the rear of the product. Having these flanges rotated
into any other position will result in instability in the seat.
3. Connect both battery connectors to the main cable.