AT-1212 User Guide and Specifications - 22 -
www.activetechnologies.it
GeneratePulse(Host).vi
Software requirements: LabView 2012
This VI is an user friendly example that generates pulse signals. On AT-1212 adapter modules it
starts/stops both channels.
Select the
resource name
and the
adapter name
(1120 or 1212).
Clock Selection
: select the DAC clock source. It can be Internal (from Clock Generator circuit)
or External from SMA connector (1.25GHz).
Internal Clock Source
: select the source clock for the Clock Generator circuit. It can be From
Oscillator (onboard TCXO) or From FPGA Clock ( from PXIe Backplane - DSTARA Timing
board).
Set the NumSamples: the samples number of the pulse waveform. It must be multiple of 16.
Module Init OK: indicator that states if the module is properly initialized or not.
SKIP INIT: if true, the FAM skips the initialization phase.
Summary of Contents for AT-1212
Page 41: ......
