Walk`n´Chair
TM
User ManUal |
9
Use and Safety
- Hand Grip Height Adjustments
In the 900 “twist” position the whole Handle Bar
Grip Assembly can be adjusted up or down.
Be sure that the height adjustment latch is
in the desired slot by moving Handle Bar
Grip Assembly up and down until latch is
secured in slot.
When steps 2-5 from pages 7 and 8 have been
completed, the Handle Bar Locking Knob and
Handle Bar Grip should look like the above
picture.
After both Handle Bar Grips are at the desired
height, release the Handle Bar Locking Knobs by
twisting and jiggling
into locked position.
1.
3.
2.
5.
4.
Latch
Note both Handle Bar Grip Assemblies
in the reverse and locked position.
DO nOT OPEraTE Walk`n´Chair
TM
UnTiL
BOTH HanDLE Bar griP assEMBLiEs anD LaTCH
aDJUsTMEnTs arE in THE LOCKED POsiTiOn
Wa r n i n g
