INSTRUCTIONS
11
TERMS AND SYMBOLS
Several symbols are used in this manual and on the product itself which are aimed at promoting
proper and safe operation in order to prevent personal injuries or damage to the chiller. Please
familiarize yourself with the symbols below before reading the manual or trying to operate the
chiller.
Hazard levels will be indicated in writing or shown by pictures. The symbol on the left provides
general emphasis of the hazard, but specific details of the action which must be taken will be
shown by a picture or explanation near the symbol.
This term indicates the possibility that continuing to operate the chiller while ignoring this
warning or operating the chiller incorrectly, may cause personal injury or equipment damage.
This symbol advises you of a potential hazard which should be noted (including danger and
warning).
This symbol advises you of a mandatory action which must be taken in order to avoid danger.
This symbol advises you of an action which is prohibited in order to avoid danger.
WHERE TO INSTALL
1. Do not install the chiller outdoors (Fig. 1).
2. Place the chiller in a ventilated space away from flammable materials, high temperatures, direct
sunlight, moisture, and dust (Fig. 2).
3. Place the unit on a stable horizontal surface (Fig. 3).
4. Install at least 12 inches (30 cm) away from walls in order to give the chiller adequate ventilated
space (Fig. 4).
5. Do not cover or move the chiller while it is operating (Fig.5).
≥12inches
≥12inches
AACH10_25_50_100_Instructions_8.1.2018.indd 11
2018/8/2 13:53
