background image

ACTiSYS Corp. 

 

IR Printer Adapter /100M/100MP 

 

FCC & VCCI Compliance Statement 

 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: 
(1)This device may not cause harmful interference and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 
WARNING-FCC Regulations state that any unauthorized changes or modifications to this 
equipment not expressly approved by the manufacturer could void the user authority to operate 
this equipment 
 
NOTE: This equipment has been tested and found to comply with the limits for Class B digital 
device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
 
-Increase the separation between the equipment and receiver. 
-Reorient or relocate the receiving antenna. 
-Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
-Consult the dealer or an experienced radio/TV technician for helps. 
 
This equipment is in the 2

nd

 Class category (information equipment to be used in a residential 

area there to) and conforms to the standards set by the Voluntary Control Council For 
Interference by Data Processing Equipment and Electronic Office Machines aimed at 
preventing radio interference in such residential area. 
When used near a radio or TV receiver, it may become the cause of radio interference. Read 
the instructions for correct handling. 
 
NOTE: Must be used with shielded cable only. 
FOR YOU RECORDS 
For your assistance in reporting this product in case of loss or theft, please record the model 
and serial number which are located on the bottom of the case. Please retain this information. 

Model Number                    

Serial Number 

Date of Purchase   

Place of Purchase 

All indicated copyrights and trademarks in the following pages are copyrights and trademarks of 
their  
Respective corporations. 

 

Release 3.2,  December  9, 2003 

 

© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved

 

 

Summary of Contents for ACT-100M


















Reviews: