3
firmware update is available. See "
Updating MyWirelessTV Firmware
" for more details.
OTG
port. Reserved for USB Backchannel feature.
Transmitter Rear Panel
Power port. The
5V DC / 2A
power port is used to connect the Transmitter to a power
source.
HDMI Input
port. The
HDMI Input
port is used, via an HDMI cable, to connect the
Transmitter to an HDMI source (set top box, Blu-ray player, gaming console, etc.).
HDMI Out to TV
port. The
HDMI Out to TV
port (a pass-through port) is used, via an
HDMI cable, to connect the Transmitter to a local HDTV to allow continued video
viewing on the monitor located nearest to the Transmitter. Connection to this port is
optional.
IR Transmit
port. The
IR Transmit
port is used to connect the IR Blaster cable to the
Transmitter, enabling the use of the source device remote control in tandem with
MyWirelessTV.
1.4.2. MyWirelessTV 2 Receiver
The MyWirelessTV 2 Receiver features four ports (Power,
HDMI Out to TV
,
IR Ext
, and
USB
), two buttons (
MENU
and
SELECT
), and three LEDs (
MODE
,
LINK
, and
POWER
).
Receiver Front Panel
MODE
LED. Reserved.
LINK
LED. The
LINK
LED is used to display the state of pairing between the
Transmitter and Receiver. If it is blinking or off, the Transmitter is not paired with any
Receiver. If it is glowing steadily, it has paired with a Receiver.
POWER
LED. The Power LED is used to display the state of the Receiver's power. If
unlit, the device is off. If lit, the device is on.
USB
port. The
USB
port is used to connect a USB stick drive to the Receiver when a
firmware update is available. See "Updating MyWirelessTV Firmware" for more details.
MENU
and
SELECT
buttons. The MENU and SELECT buttons are used together to
access the GUI menu. Pressing the
MENU
button selects an option, and pressing the
