ActionTec MegaPlug HPE400T, User Manual

Page: 20 / 55

17
Setting Up Static
IP Address
To communicate with a MegaPlug 4-Port Hub from a computer on the network,
the user may have to switch the
IP
address settings from
DHCP
-enabled to static
IP
,
so that the computer and the Hub are on the same subnet.
To set up static
IP
on a computer, select the operating system and follow the
instructions.
☞
Note : The following procedures are based on the Hub’s factory
default
IP
address. If the Hub’s
IP
address has been changed,
enter the new
IP
address when instructed to enter an
IP
address.
Windows 98 SE
1.
From the desktop, click on the
Start
button in the lower left corner.
2. From the menu that appears, select Settings .
5