Step 2 :
Connect to your Modem/Router
Step 1:
Connect to your Device
Get one
MoCA
2.5 Extender
.
Locate the device or access point (laptop, etc.) that
needs to connect to the Internet. Connect one
Ethernet
Cable
from the
Extender
to the
Device
.
Connect one
Splitter
to the
Coax Cable
coming from
the
Coax Outlet
on the wall.
Connect one
Coax Cable
from the
Splitter
to the
Coax
In
port on the
Extender.
Connect one
Power Adapter
to the
Extender
and to a
Power Outlet
.
Wait until the
Power
light on the front of the adapter
is
GREEN
.
IMPORTANT!
If the
Coax
LED
on the
Extender
is already
GREEN
, you may have MoCA built in to your
modem/router. Check the device you just connected. If it
is connected to the Internet, you’re done*. If the device
does not connect to the Internet, continue to Step 2.
*
You may use the 2nd adapter with another device or access point.
Get one
MoCA
2.5 Extender
.
Connect one
Ethernet Cable
from the
Extender
to the
Modem/Router
.
Connect one
Splitter
to the
Coax Cable
coming from
the
Coax Outlet
on the wall.
Connect one
Coax Cable
from the
Splitter
to the
Coax
In
port on the
Extender.
Note:
If you have a TV or set top box near your modem/router,
connect a coax cable from the splitter to the TV or set top box.
Connect the second
Power Adapter
to the
Extender
and to a
Power Outlet
.
Wait until the
Power
light on the front of the adapter
is
GREEN
.
When the
Coax
LED is
GREEN
on both adapters, your
adapters are working.
a
a
b
b
c
c
d
d
e
e
f
f
g
g
g
Coax
Outlet
Power
Adapter
Power
Outlet
MoCA Extender
Laptop or other
access point
TV
Splitter
a
d
e
f
c
Ethe
rn
et Cabl
e
b
(Coaxial wiring behind the wall)
Coax LED
Power LED
ECB7250
Ethernet
Power
Power Coax
Coax In
ECB7250
MPS
Eth
ern
et
Po
rt o
f
Mode
m
/R
ou
te
r
g
Coax
Outlet
Power
Adapter
Power
Outlet
MoCA Extender
TV
Splitter
a
d
e
f
c
Ethe
rn
et Cabl
e
b
Coax LED
Power LED
ECB7250
Ethernet
Power
Power Coax
Coax In
ECB7250
MPS
