Connecting the Adapters
Connecting the Adapter is a relatively simple process. First, connect one
Adapter to the TV or set-top box, the broadband modem or router, and
the coaxial network to establish the Internet signal.
Th
en, additional
Adapters can be installed throughout the home or o
ffi
ce at any location
Ethernet Internet access is needed, and an available coaxial port is
available.
Connecting the First Adapter
Th
e
fi
rst Adapter must be connected to the TV or set-top box, the
broadband modem or router, and the coaxial network.
Th
is Adapter takes
the Internet signal from the modem/router and delivers it to the coaxial
network, while keeping the TV/set-top box connected.
To connect the
fi
rst Adapter:
1. Remove the end of the coaxial cable connected to the TV or set-top
box from its coaxial wall port.
2. Connect the end of the coaxial cable removed in step 1 to the
TV/STB
Out
coaxial port on the side of the Adapter.
3. Connect another coaxial cable into the coaxial wall port le
ft
unconnected in step 1.
4. Connect the other end of the coaxial cable installed in step 3 to the
Coax In
coaxial port on the side of the Adapter
5. Connect one end of an Ethernet cable into the Ethernet port of the
modem/router.
6. Connect the other end of the Ethernet cable into the
Ethernet
port on
the side of the Adapter.
5
