ActionTec BTM200 Installation Manual Download Page 9

 

 

Regulatory Compliance Notices Class B Equipment 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications.  However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
 

 Reorient or relocate the receiving antenna. 

 Increase the separation between the equipment and receiver. 

 Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

 Consult the dealer or an experienced radio or television technician for help. 

 
Modifications 

 
The FCC requires the user to be notified that any changes or modifications made to this device 
that are not expressly approved by Actiontec Electronics, Inc may void the user’s authority to 
operate the equipment. 
 
Declaration of conformity for products marked with the FCC logo – United States only 
 
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry of Canada.  
Operation is subject to the following two conditions: 
 

(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause  

undesired operation. 

 
 

"IMPORTANT NOTE: 

The radiated output power of this internal wireless

r

adio

 is far below the FCC radio frequency 

exposure limits.  The internal

wireless radio operates 

within guidelines found in radio frequency safety

standards and 

recommendations, whi

c

h reflect the consensus of the 

scientific community. 

The level of energy emitted is far less than the

electromagnetic energy 

emitted by wireless devices such as mobile phone

s

.  However, the use of wireless radios

may be restricted in

 

some situtations of environments, such as aboard airplanes. If you are unsure of 

restructions you are 

encouraged to ask for authorziation before turning on the wireless radio."

Actiontec Electronics, Inc 
760 North Mary Ave, 
Sunnyvale, CA 94086 
United States 

Summary of Contents for BTM200










Reviews: