The Range
Blade Features
The Actionair Series FG Fire Dampers are
suitable for air conditioning and ventilation
systems requiring up to 4 hour fire
protection.
These galvanised bladed Actionair dampers
are fail-safe closed and are supplied as
standard with chain and bar type fusible
links rated at 72°C.
Casing Features
Series FG
Specification
Series FG
The Actionair Series FG curtain fire
dampers comprising of a galvanised steel
folding curtain having unbroken movable
joints and stainless steel constant tension
closure springs for positive closure.
The chain and bar type fusible link shall
ensure the closure of the galvanised steel
curtain under full fire conditions. All
housed in a galvanised steel fully welded
spigotted type casing suitable for square,
rectangular or circular connections. Visual
indicator and side seal gasketting not
available.
Series FG Fire Dampers as supplied by
Actionair.
Blades
The blades are roll formed interlocking
blades manufactured from 0.7mm
galvanised steel.
Stainless Steel Closure Springs
Stainless Steel constant tension springs
are fitted and positioned out of the
airstream to close and latch the damper,
regardless of vertical or horizontal
operation.
Spigotted Casing
The spigotted casing with continuously
welded corners and spigot connections,
makes these dampers suitable for
inclusion into air distribution systems to
the HVCA Ductwork specification DW144.
These galvanised casings are
manufactured with either Square,
Rectangular or Circular duct connections.
Multiple Assemblies
Square and rectangular casings are
available in multiple module arrangements,
supplied complete with connecting channels
for site fixing by others.
2
www.actionair.co.uk
DWFX
TM
(DRY WALL FIX) Installation
System
Typically for installation into Dry Wall, Stud
Partitions.
HEVAC / HVCA Galvanised Steel
Installation Frames
Typically for installation into Blockwork,
Concrete walls and floors.
S&A (SLEEVE AND ANGLE) Installation
System
Typically used to fill voids around dampers
to complete a penetration seal.
Approved Installations
The Actionair Approved Fire and Smoke
Dampers Installation manual is available
for free download, along with DW 145
check sheets, on our web site.
Building and Local Authority control,
cannot refuse these tested methods.
This damper is designed to be used in
clean dry filtered air, and is not to be use
in corrosive/contaminated environments.
For all application in potential
corrosive/contaminated environments,
please seek advice from the Actionair
sales team for a suitable product.
The Actionair BASE RANGE offers clients low entry
products without compromising quality and performance.
The FG Fire Damper is part of this range providing a cost
competitive alternative to our fully spec FireShield
