ADDRESSING THE FANS USING EC CONTROL SOFTWARE
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.
Copyright © 2016 Actron Engineering Pty. Ltd.
Hercules Units w/ CM100- Addressing the Fans Using EC Control Software
9590-7005
Rev. 5.0 220201
Page 21 of 24
4.29
Close the window.
4.30
Switch ON the next Fan.
4.31
Follow procedures
4.10
to
4.29
.
4.32
When searched for the next fan is completed, the next screen will be displayed:
Note that every new fan will have an initial address as 1.
4.33
When the first two fans are configured the following screen will be displayed.
4.34
Follow the same procedures above to address the rest of the fans.
