6
S002153 Netball Stand
Assembly Instructions (cont)
16
17
18
19
13
12
9
10
9
10
14
6. Insert Lower Middle Pole (18) into
Upper Middle Pole (17) and align the
holes. Secure these poles together
using a Screw M5x16 (13). Please refer
to Diagram #4.
7. Insert Base Pole (19) into Lower
Middle Pole (18) and align the holes.
Secure these poles together using
a Screw M5x16 (13). Please refer to
Diagram #4.
8. Connect the Support Arms (15) to the
Base Pole (19) using Square Screw
M8x20mm (12), Washer (10) and Nut
(9). Please refer to Diagram #5.
9. Place the Base Pole (19) into the Base
(1) and secure it underneath using
Twist Bolt (7). Please refer to Diagram
#2.
10. Attach the Support Arms (15) to
Base (1) using 2 x Square Screw
M8x20mm(14), 2 x Washer (10) and 2
x Nut (9). Please refer to Diagram #6.
11. Click both Wheels & Axle (3) to Base
(1). Please refer to Diagram #2.
12. Remove Fill Cap (6) and fill Base (1)
with sand or water to ensure that the
netball stand is stable and will not fall
over when being used. Using sand is
recommended.
DIAGRAM 3
DIAGRAM 4
DIAGRAM 5
DIAGRAM 6
8
11